Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Finishing and Sealing Hulls

[quote=jgregs][quote=tominpa]All hull repairs I have ever done are with epoxy. The mechanical bond of polyester resin is just much weaker, but if you were using a thickened polyester to bond the deck lid to the hull, it is not something left submersed, and is an adequate adhesive that you might be able to separate in the future if you need to access inside the hulls again. Epoxy is mostly permanent. If I had some minor gaps to seal, I would use 3M 4200 not silicone. It would help to know exactly what was repaired or bonded with polyester.[/quote] I used polyester resin along with fiberglass cloth to fill and strengthen a crack along the front of the hull. Now I'm wondering if I need to get the angle grinder and redo it all[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.