Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Fix up aluminium spinnaker pole - Nacra 15 - temporary

[quote=P.M.]I modified my N20 spin pole to be a two piece pole for easier transport and sail box storage. The connection is an inner sleeve/bushing made out of 6061 aluminum stock. Has worked flawlessly for years. Only fastener is a single rivet on one piece and the other piece is held in place under compression when you prebend and connect the spin pole bridles. In your case, if the snuffer rivets are in the way where the sleeve would be positioned, you would need to remove all the rivets to the snuffer and re-install after the sleeve is placed. Should be an easy fix to get you through.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.