Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Help identify this roller furling swivel on a Nacra 5.8?

[quote=carbonc][img]https://i.ibb.co/6gh6yg1/9-ED35-E9-C-1093-4-B60-BC2-F-DA0346-C062-EF.jpg[/img] Upon inspection my 5.5 uses a Ronstan fork by eye swivel (link below). I measured out the offset from the hounds to jib halyard block and it’s right at 4in now. If a 4 inch section of wire was added before the swivel it would drop the jib halyard down at least an inch when accounting for the shackle. [url] https://www.ronstan.us/marine5/range.asp?RnID=230[/url]<!-- editby --><em>Edited by carbonc on Nov 25, 2021 - 08:53 PM.</em><!-- end editby --> [/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.