Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Mystere 5.5 Mast ball bushing

[quote=MN3]there is the perfect item for your mystere mast ball a 20oz gator aid lid there is a Stainless steel component to the old mystere ball - there should also be a stainless steel insert in your mast base. this is your actual pivot point. the ball being grinded down isn't that big a deal -most of the pressure is on that SS pivot point and grinding away will stop at some point. my mysteres are both ground down like this i had my beams worked on a few years ago (grind down, new alum added where needed, painted) and i asked my spar builder/rigger about building up my mast ball - he said "don't do it - not worth it - will grind away again and your SS is the pivot (he owned several mystere's in his day) the only time it becomes a real issue is when using a stepping pin may be unusable and line needs to be used instead since the mast is a bit lower on the ball[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.