[quote=klozhald][quote=Edchris177]The lines in this photo are wrong, each side should dead end on the beam eye just inside the cleat on the beam. You run the line from dead end to rotator-back to cleat- around mast- through opposite cleat- to rotator - back to dead end. This gives a 2:1 for positioning the rotator, & it does require some force with higher wind loads.
[img]https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=74457&g2_serialNumber=7[/img][/quote]
This may be the best and simplest forced mast rotation I have ever seen. This would give you what you want with a soft rig (not pre-bend) mast in a big blow on a broad reach. Or travel in and employ a boat load of leech twist.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
