[quote=eastcoast_saylor]Thanks for the information everyone.
I did suspect that the cause may have been due to the load and pressure on the hulls from the rollers and thankfully everything is sitting on cradles now.
I did open up the access port but the crack is far up enough that its hard to get a good look or have physical access to the cracks from the inside. When I did open it up though, there was water inside the hull and it was slowly leaking out through the crack.
It seems like the best course will be to sand it on the outside (making sure I get the whole dimension of the crack, like charlescarlis mentioned) and then do the repair. If I'll only be able to get glass on the outside, should I consider anything else? My plan is to fix it later this week and appreciate everyone's input so far.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
