Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Material for sailbox build

[quote=gahamby]I went with pressure treated 1/2 ply reinforced with PT 1x3. glued up with PL adhesive and fastened with SS screws. I painted the exterior with bed liner, lined the interior with outdoor carpet. It's like having a 10' plywood skiff on the tongue of the trailer. I had to move the axle forward to lessen the tongue weight. The box holds everything boat related. Two sets of rudders, sails, rigging,Torquedo motor, harnesses, PFD, spares, the lot! Nothing on the tramp or in the van. The lid is between the hulls ahead of the front beam ans slides back under the tramp so I can get to everything prior to launching. I would have preferred a lighter construction material but plywood was what I could deal with doing it in the side yard.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.