Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Go-Pro Mount??

[quote=jonathan162]As mentioned above, I did basically the same thing on my Mystere. The differences are that, since I don't have a forestay chainplate on that boat, I clamped the bridle wires (in milled grooves) between two chunks of UHMW plastic along with a ball bearing that the 1/4-20 bolt for the camera goes through so it can rotate freely. But since it was swinging [i]too[/i] freely and I was getting seasick watching the video, I epoxied a 1/4-20 nut to a frozen juice can lid and screwed it onto the bolt as well, so that I could clamp a little sheet of soft foam between the lid and the UHMW plastic and dial in the pressure to adjust the damping. Much better result. Follow all that?[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.