[quote=rch701]I was just posting about this same topic for a Hobie 16 with about the same amount of delam. Just as an academic exercise, could one drill a ~3/4" hole in the outer skin at one extreme of the delam and hook a vacuum to it to pull the inner and out skins together? Then you could inject resin at the other extreme. Once that sets the inner and out would be much tighter and reduce the overall resin use for the remaining delam repair (if there was any). Obviously the drain plugs need to be pulled. I have never vacuumed bagged but the theory seems sound. Thoughts?[/quote]
No HTML tags allowed (except inside [code][/code] tags)