[quote=rch701]Dogboy, Totally agree on both points. The wood was what I had on hand. I will sand them for a looser fit and epoxy the edges to prevent swelling. I did not know the wings went the other way. They are symmetrical for mounting and I have not riveted in the elbows yet. I thought it would be good to have the skipper seat further aft which is why I have it that way.
MN3, Its in the works. I was holding off drilling the beams at all until the setup was confirmed. At a minimum I will tie small line across the boat to tension the rigs to each other. I will also likely use one trap line at a lift to take some of the load off the wings. Then again, more crap to hit when pitchpoling/cartwheeling[/quote]
No HTML tags allowed (except inside [code][/code] tags)
