[quote=Edchris177]Here is the setup, as per the Nacra manual, the Prindle is the same
[url][/url]https://www.thebeachcats.com/index.php?module=pictures&g2_itemId=35332
Here’s a photo from a 5.2 rebuild. You can see the thin black line is the preventer. It goes from where I described above, up to the mast & then down to the opposite side of the front beam.
You may already have a fitting on the mast, used to hold the halyard from flogging.
[url]http://www.radesignz.com/graphics/sailing/08/redo/IMG_2582.jpg[/url][/quote]
No HTML tags allowed (except inside [code][/code] tags)
