[quote=a1cnc]So I did this mod this morning. Took all of about 10 minutes with cutting the 1/4" shock cord, melting the ends and tying it up.
SO, first I tied Both shock cords to a hole in the side of the Harken cam adjusting plate, One on the left the other on the right side. I used a lower hole to keep it from getting in the way. Then I tied the other end through the outer end rectangular hole in the traveler. I tensioned the first side to pull the block a bit towards the side I was working on, in my case I started on the left. Then I did the other side and just adjusted the knot until the block stood up straight.
I used (2) 9" long pieces, Tied (2) half hitches on each end to keep it from slipping.
I will see how it works tonight. Last night without it EVERY time I tacked the dam block would wrap around and hang up if there was even a second of slack in the mainsheet. :grrr:[/quote]
No HTML tags allowed (except inside [code][/code] tags)