Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Help with building a gin pole

[quote=MN3]Great answers! I didn't see trap wires in the images but i am happy to see your responses. you seem to be a very "handy" sailor - so i hope i don't sound like i am preaching or being argumentative : with all the respect in the world ... My only concern is that "loop" (port side / dog clip) : i am certain under a few circumstances .. that loop will pay line out that loop is a simple luggage tag (used all the time with spliced end/eye splices). I have used this "binding" many times in [i]many[/i] scenarios - I have tried to use this on my jib clew and spinnakers - it fails (slips) even with non dyneema. this is not secure, esp using very slick non jacketed high modulus line (dyneema), just a smidge of slack in that tag and it will freely pay out... add some water to that somehow and it's even slicker I always try to prepare for worst case scenario - ymmv: if somehow the port bridal line fails it could pay out and now you have lost the mast lower guy line too. [img]https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=131491&g2_serialNumber=3[/img]<!-- editby --><em>Edited by MN3 on May 28, 2019 - 06:33 PM.</em><!-- end editby --> [/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.