Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Sta-Master shroud adjusters

[quote=gahamby]It looks like the shroud is Nicopressed directly into the top of the adjuster. That must be how they come from the factory. If the shortest shackle you can find puts too much length in the shroud for you to be able to adjust it, you're going to have to Nicopress the shroud on to the Sta Master directly. You might need new shrouds. You could pin a shackle through the Nico eye and the hole in the adjuster. That puts a lot of load on the pin.If you go that route make sure the pin can't roll out. Use a shackle with a clevis ring pin or a threaded pin you can wire closed.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.