Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Reversed spreaders on mast

[quote=texastuma]An idea, reverse the spreaders on the mast to gain an automatic mast bend. Typically the aft raked spreaders induce pre-bend. I have found that when you induce more bend by mainsheet and downhaul, the center of the mast will fall off to leeward a bit. If you reverse this and use less spreader tension, the mast would be straight in light air but allowed to bend (limited by the forward rake and tension) with downhaul and mainsheet tension. It is dramatically different and the diamond wires would probably need to go up one size. The trick would be to have enough side support to keep the side loads in check and to have the rake forward enough to control the bend. thoughts...[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.