Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Will I need Cat Trax?

[quote=Edchris177][quote] OR worse have the cradle rotate just as you are putting the boat on it and the bolts scar or pop your hull I put a block of wood with holes drilled out for the bolts and rubber cemented this on the bottom of the cradle[/quote] The bolt heads are the countersunk,(45* angle heads). After drilling the holes in the PVC, put a countersink gizmo in your drill, & cut an “inverted pyramid” into the PVC. The Bolt head sits just below the surface of the PVC, & cannot contact anything. The other end of the Bolt is slightly shorter than the thickness of the 2x2. A small hole accommodates the bolt shank, a larger one appx 3/4” deep, accepts the nut, keeping it below the surface. There is nothing that can score the hull.<!-- editby --><em>Edited by Edchris177 on Feb 14, 2019 - 08:20 PM.</em><!-- end editby --> [/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.