Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Prindle Rudders

[quote=mattson][quote=mattson]The typical repair here is to fill the hulls with epoxy (recommend JB Weld for this small of a project), and redrill them. The location is critical for correct operation of the hulls and the proper helm balance. You can shoot for the center of the old (larger) hole, or get a hold of a non-worn rudder to use as a template.[/quote] Been out of town without the password to the forum since I posted this. It's all screwed up. Do not fill your hulls with epoxy. The weight will be outrageous and the boat will probably sink. Fill the HOLES in the rudders with epoxy. And the "correct operation of the hulls" should be "correct operation of the rudders". I must have been drunk when I wrote that.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.