Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Broke my Prindle 19 - Repair Advice

[quote=MN3]again really sorry to hear - this hurts I have seen p19 do this before. we had 2 friends on the wire and the p19 buckled right there. they heard the sound and hit the brakes. they didn't have a full failure but it was creased and had to be fixed. At that time we found out this was a known issue i have had 2 tangs fail on my 5.5 - 1 side, 1 bow both times were at very low stress moments on the boat: once was at anchor, the bow tang went out in a 5 knot gybe both required surgery, the bow tang being by far the most for the bow tang ... after removing decks (not so cleanly) i saw a ton of cracks in the bulkhead under my beam (where 5 years earlier i had to cut through to repair the broken shroud tang), so I made some new/additional bulkheads (i wish i had the info posted above, but i had some guidance) in retro- i would have skinned/vac bagged the bulkheads : i wanted to save weight but would rather have the strength with hindsight lots of images here are missing but for whatever it's worth ... [url]https://www.thebeachcats.com/index.php?module=forums&func=viewtopic&topic=16179[/url][/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.