[quote=briantroberts][quote=mattson]The typical repair here is to fill the hulls with epoxy (recommend JB Weld for this small of a project), and redrill them. The location is critical for correct operation of the hulls and the proper helm balance. You can shoot for the center of the old (larger) hole, or get a hold of a non-worn rudder to use as a template.[/quote]
The more I looked around at general rudder repairs, I see that the epoxy route is common. I've got tons of different epoxies around the shop. This is probably what I'll do. Thanks!
[quote=klozhald]
Making new rudders is really difficult to do well.[/quote]
Just curious, but what would be difficult about it? I've got 2 to use as templates, seems like it would be pretty easy given the right tools.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
