[quote=Dogboy]Recommended earlier in the thread....
[quote=Dogboy]
IMO, the best way to pressurize your hull is to take a piece of tubing and jam it into the drain plug. Blow half a dozen or so lung fulls into the hull and then clamp off the tube. Then go around the boat spraying the hulls with soapy water (a windex type squirt bottle works best). Anywhere you see bubbles, you have a leak. You will have to "re-inflate" the hulls every couple minutes as you go. I have checked for leaks on several boats using this method and it works great. I would not risk damaging the boat using a mechanical pump- especially on a rotomolded boat where the damage would not be able to be repaired. [/quote]
Wrap several layers of electrical or duct tape around the end of the hose and you can thread it into the drain plug fitting for a reasonably air tight seal.
sm[/quote]
No HTML tags allowed (except inside [code][/code] tags)