[quote=revintage]Hey Andinista,
Did some more thinking about how to lower the bridle. By adding a third bridle part to the rear, with a pelican striker passing the striker rod going to the rear beam this should be possible. With a 460mm high bridle angle=20 and BT goes from 1,5 to 2,9, ie if we still want each bridle wire take FT/2=0.75 there will a substantial tension to the pelican striker that has a=22. As the spi pole acts as a compression rod, more tension can be added to the pelican striker than the bridle wires.
Not sure I got it right, what do you think?
[img]http://racerdirekt.com/DS2.jpg[/img][/quote]
No HTML tags allowed (except inside [code][/code] tags)
