[quote=jalex][quote]They are foam core. I used an alternative solution to the traditional fiberglass repair that was simple, easy and effective on my G-Cat 5.7...
I turned the boat upside down and spread 2-part high density foam as thinly as possible to completely cover the soft areas. It expanded to about 1 inch thick layer and hard as a rock.[/quote]
Can you elaborate on this? You spread the foam on the inside skin through an access port? Or you spread it on the deck itself? I plan on doing the repair soon on my 5.7. Thinking of either trying the injection method, but really want to just cut the top skin off in the affected area put some cloth and epoxy back over the core and then put the skin back on. My area is a lot smaller than the OP. 30 inches seems long[/quote]
No HTML tags allowed (except inside [code][/code] tags)