[quote=gahamby][url]http://www.uscomposites.com/index.html[/url]
[url]http://marinetex.com/[/url]
[url]https://interlux.com/en/us/[/url]
[url]https://www.westsystem.com/[/url]
West System is great stuff. It's on the pricey side but they've worked it all out for the consumer level.
I have been working on my SuperCat rudders recently using both West System and Marine Tex.
Both great products. They have a long shelf life.
Marine Tex cures to a nice white in 24 hrs. It machines nicely. It hasn't yellowed on me so far.
It will always look like a Marine Tex repair left unfinished. One small(4 oz.) jar would probably fit your needs.
West system will yellow.
For paint, top end is Interlux Perfection over epoxy primer.
Gel-coat can be a pain in the a$$. Lots of sanding to be done.
Q&D is a rattle can of Krylon for plastic.
I'm using some Interlux Brightside single part polyurethane. It rolls and tips ok, I wish I could spray it.
Remember they're boards you're going to eat them up in the long run. Fix em up and go sailing.
In the tool box? How about a spare hub? A grease gun, an electrical tester,breaker bar, spare bulbs,wheel chocks, extra tiedown straps. PB Blaster. flashlights, rum, Boat US card............... Good Luck GH[/quote]
No HTML tags allowed (except inside [code][/code] tags)