Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Water in Hulls

[quote=leeboweffect]In my experience with the H16 I usually found and cured leaks that were around the pylons from small cracks to no sealant. If you don't have sealant around the pylon/hull opening you will most definitely have a leak. If there's sealant there and it's old it is likely just hanging there without forming a seal so dig it all out, clean all the surfaces (where sealant must bond) and apply a new bead. For this I like either 3M 3200 (DO NOT use 5200 or 4200) or a silicone/urethane blend sealant like LifeSeal. [img]http://uploads.tapatalk-cdn.com/20160413/e9446838d01d02374361498c99490efa.jpg[/img] [url]http://www.boatlife.com/lifeseal-sealant-cartridges/[/url][/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.