[quote=Dogboy]If the rivets are pulling out, most likely the rivets were too short for the overall material thickness and were not able to fully flare when they were pulled, or the diameter of the hole drilled in the crossbar was too large and it’s allowing the rivets to pull through. If the holes were drilled too large, you can order rivet “caps” from Hobie or Murrays. These will act as a sleeve to take up the extra space between the rivet and the crossbar.
The other question would be what do you mean that the track is “lifting up?”
Is it actually pulling away from the crossbar or is it just rocking back and forth? Those tracks always seem to have some back and forth movement, so I would not be too concerned if that is the case. If the track is actually pulling away from the crossbar, then it needs to be re-riveted. I would not use 5200 or any adhesive to attach the track.
sm<!-- editby --><em>Edited by Dogboy on Oct 24, 2017 - 08:47 PM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)