Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: 1981 GCat 5.0 Jib and Main Sheet Rigging Pics

[quote=jsb4g][quote=MN3][quote]. This is the barberhaul system on a stock G-Cat 5.0.[/quote] This is not the barber haul system - The barber hauler refers to moving the jib (clew/aft lower corner) forward (to the front beam) and out (to the ends of the front beam). This is called a 4 way adjuster if it can move port/stbd/forward/aft it can be refereed to as an jib outhaul system, but defiantly not the barber-hauler[/quote] See FXLoop's comment about there not being a 4 way adjustment. I agree with that. Also, I assure you, the GCat has a barberhauler that connects the two jib blocks with line and a small block with a jam cleat. For a visual, please refer the the GCat assembly guide posted on this site...look at the portion of the guide aptly labeled "barber hauler".[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.