[quote=MN3][quote]When I had the old aft tramp installed, there were two grommet holes on the tramp with a rope through each that was part of the jib rigging. But when I received the new aft tramp, it doesn't have these grommet holes, rather it has two straps running fore and aft with a loop....I'll have to provide a pic. Is this the barber haul?[/quote]
i assume your talking about the jib blocks - again lots of ways to attach these - sometimes they are static and attached through holes in the tramp - sometimes attached there is a wire or line that goes across the tramp (port to starboard) that the blocks are attached to. with the use of another line (and turning block) that pulls the blocks out to the side of the boat (outhauled for downwind sailing) or allows them to slide inboard (inhauled for up wind use)
we will have to see what you got and recommend how to rig it (or follow the set up manual)<!-- editby --><em>Edited by MN3 on Aug 17, 2017 - 08:38 AM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
