[quote=dmgbear55]Further to NacDaddy this tube is installed and removed through the outside end of the main beam. So once you get the DS rod through this tube you get to get that compression tube out through the end of the beam (or if it looks OK just leave it in place). That is followed by even more fun reinstalling this little tube. The trick is to tape it to the end of a stick or something that is about 5' long and then maneuver it back into place. It really helps to have another pair of hands for that part of the project when you are reinstalling the new DS rod.
There is a good chance that someone coated this rod before making the DS assembly so you may only have to deal with getting the bent rod extracted. There was a good thread a while back that dealt with a difficult removal of the DS rod. Maybe someone will remember it or figure out a good keyword search to find it again.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
