Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: nacra 5.2

[quote=pknapp66]Usually when a tuning guide gives you a setting like you described you get the boat level and take a trap wire forward to the point that the rear of the bridle tang meets the hull. You might have to add a bit of line to the trap handle to reach this point. Pinch the trap wire at the point that it hits the hull by the tang and then walk back until the point that you are pinching touches the rear of the hull. It should in your case be between the center and rear of the hatch. I have also seen where you tie a weight to the halyard and use it like a plumb bob but on the 5.2 it appears that the front ports are quite forward and that would give little mast rake. Curious to hear others answers. Pete[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.