[quote=Edchris177]Toss #5 in the garbage, way to much work.
I had the exact same thing on my '84 N5.7. & contemplated a hatch & adding AL washers to the inside. Unless the fibrglass is breaking down, I wouldn't bother.
I simply drilled out the bad rivets, picked up a handful of 3/16" diametre x 1/4" shaft, & pulled them. That was 4 years ago, & we drive the sh*t out of these boats on windy days. So far it has held up. You could get those "sleeves" that make them sightly oversize, ( and watertight), I only had rivets so I just used a dab of silicone seal.[/quote]
No HTML tags allowed (except inside [code][/code] tags)