Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: How did you mount your electric winch on your trailer?

[quote=marekli]Tom, that's the way I have it on the P16, there's a bungee on each forward trap wire tied to the forward beam. I have not tested this yet on the P19 but may consider it next time I get around to testing the set up more. It's probably worth adding anyway, there's really no downside. The mast won't rotate while raising since it's secured via a pin to a bracket at the mast base. [quote=tominpa]Marek, are you stabilizing the mast by tying the trapeze wires to the corners of the front beam? I would think that forming a triangle using 2 trap wires to the front beam, then raising using another trap wire or the forestay might allow for the mast to start upward on its side and rotate to the straight position as the mast is raised. Not sure if the Prindle mast has a pin to capture the mast ball.[/quote]<!-- editby --><em>Edited by marekli on Oct 09, 2016 - 11:17 AM.</em><!-- end editby --> [/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.