[quote=tominpa]Sure looks nice! I'll be interested to see your solution to creating a low-slip deck and side because that mirror finish should be plenty slippery when wet (maybe a good name for your boat). The spout on the catalyst can will fit on the pigment can, so once you mix a whole batch, you can keep it covered and sealed until used. It's not just to pour or seal the catalyst. You will go 3-coats, but the results look great on the second.
I'll have to review your solution to the top-deck and see if that might be a future improvement. Meanwhile, I'm sailing and should be back at it this week with a new set of Cat Trax. I have repaired the hulls too many times, and hope the wheels prevent any future need to glass and fair the hulls.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
