[quote=Edchris177]Update:
A Good Samaritan emailed me the page showing the "Fix", use of the tool, & how to attach a pull cord to the plunger.
The article states to drill out the cam pivot pin, remove the cam, then push the plunger UP through the casting.
Am I missing something?
When I cleaned & greased it, I simply removed the large nylon tension screw from the lower casting. That allowed the spring,(with the plunger inside the spring to drop out the bottom. I can't see any reason to remove the actual cam.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
