Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra F18 Front Crossbeam rigging question

[quote=KurtHansen]Good morning - I have a new question related to this subject. I also have a 2001 Nacra F18 with a single shock cord going through the front beam. On the end of each shock cord is a 1" SS ring so the cord cannot go into the beam. How do you attach the Cunningham and/or jib sheet to this shock cord? On the Infusion, there appears to be 2 lines through the beam and for the Cunningham it appears somehow the beam shock cord can pull the excess Cunningham line into the beam. My F18 is not rigged this way because at the end of the shock cord, external to the beam plate, there is a SS ring. Is there a way on the F18 to pull the excess lines into the beam? Right now I tie off the jib sheet and Cunningham to the ring with a bowline. I am not sure this is right. I do not believe the beam shock cord is to be used for my crew trapeze - I have two other trapeze shock cords already through the hulls for this purpose. Thanks - Kurt[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.