[quote=tamumpower1]Yea I'd redo those for sure. It's easy. For that volume of hole I'd just get a 5 buck tube of 2 part epoxy, tape off the bottom of the hole and fill. Sand the surface, mount the castings and drill away. You could trace a pencil outline of the location of the rudder castings onto the blade to help you position them for redrilling the hole.
The epoxy will hold stronger than poly resin. Just make sure when you pour it in the hole you don't trap a big air bubble in there since it mixes thick enough to possibly do that.. Other than that its an easy repair.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
