Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra 5.2, Sheared off bolt in hull - anyone used a bolt extractor successfully?

[quote=arch][quote]Does anyone know if there's any room below the nut to push it out. It might turn out easier to drive it thru instead of out.[/quote] pairajacks, not sure what you mean by 'nut'? in my experience, there is no bottom to the bolt hole that would stop the bolt from dropping into the hull. you'll find there is no 'nut' on the bottom of the bolt but a threaded sleeve that the bolt is screwed into. that sleeve is cast into the fiberglas and if you hammer the bolt in you will do some major damage to the hull before you're through. do all you can to drill it out first. j[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.