Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra 5.2, Sheared off bolt in hull - anyone used a bolt extractor successfully?

[quote=pknapp66]The most important part of this process is not heating up the bolt that you are drilling. Stainless will work harden in a heart beat and will make it very difficult to drill. Go as slow as possible and keep stopping to let everything cool down. Best luck that I have had drilling stainless is to use plain water as a coolant and plenty of it. Take your time and expect to helicoil the hole. You most likely galled the threads and locked the bolt and then broke it. The easy out extractor won't get as good a bite as you had with a wrench or socket. Sometimes you can get lucky and drill the bolt very close to the threads and collapse it inward and pick it out. Good luck with it.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.