[quote=JohnES]No a hard thing to do.... and you'll need to take your time..
Get three new drill bits.... small, medium, and the size of the ex-out your going to use... starting with the small bit start drilling slooooooooly and get abou a 1/4 inch in.... next size bit... do the same thing and be sure to go sloooooooow... and go a little deeper...
Get you full side bit in there, go deeper add in your EZ out and life will be good again...
AS for replacing you may have to re-tap the aluminum screw plate.. no big deal common problem with NACRAs[/quote]
No HTML tags allowed (except inside [code][/code] tags)
