Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Concrete on the bottom of hulls

[quote=yelkenli1]It runs the length of the portion of the hull that typically sits on the beach, to protect against damage from dragging on the beach - a long length. I can sand it down some, and smooth it out if not remove it completely. I will probably have to do this next winter when I have a garage. Or I could buy an F16. Here is a reply to an inquiry to Mantek: [quote]Iron Crete is an epoxy which is identical (exept for color) to the epoxy resin which is mixed with glass fibers to form fiberglass. Any chemical that will remove our product would damage the fiberglass, and a temperture high enough to soften it would also damage the resins in the fiberglass. Sanding or grinding are your only good options. The product can be sanded or ground when fully cured.[/quote]<!-- editby --><em>Edited by yelkenli1 on Jan 06, 2016 - 07:55 PM.</em><!-- end editby --> [/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.