Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: nacra5.7; racing it? & South TX sailing Questions.

[quote=WillSail]The rubber cleats are aluminum, attached to the carbon fiber kick up releases. I think I ran 1/4" Vectran line for all the halyards and rudders, but it's been 6 years since I rigged the boat. I would have to assume that having my mast perfectly vertical is contributing to the weather helm. Looking at most images of cats they seem to have a little aft rake. I was a pretty hardcore Laser sailer when I got the Nacra, so I rigged it with that sort of mindset. Lasers run a purchased downhaul on the rudder, so I was pretty certain that I had addressed any issues of the rudders creeping up being an issue. The weather helm does not necessarily get worse the longer I stay out, it's just once I get up to speed, it requires wrapping my arm around the tiller extension, or almost both hands when flying a hull. Considering how fast I was going, I sort of didn't mind it. In the one race I did with the boat it was a bit of a pain and seemed like something that was costing me boat speed. Wc[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.