[quote=Edchris177]Got the album to work.
http://www.thebeachcats.com/pictures?g2_itemId=120185
It's pretty grungy on the hulls, but I think it will clean up nicely. I took a rubber block & 400 grit wet/dry to a few spots. They came out pretty nice, it's not actually a white boat!
I appreciate all the suggestions, & anything else people might notice from the photos. I would sooner do pre-emptive work, based on others experience, rather than reinvent the wheel.
[quote]If the blades are black with fibers showing, then they are likely original EPO rudders.[/quote]
If you go to the album & select max size, you can just see what looks like fibres.
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=120261&g2_serialNumber=4[/img]
[quote]There are upgraded anchor kits for the front crossbar and the shrouds.[/quote]
Is this the upgrade? If so, should the bolts still be changed out?
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=120247&g2_serialNumber=4[/img]
[quote] The front crossbars have a tendency to crack near the mast step rivets.[/quote]
There are no visible cracks on either side.
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=120304&g2_serialNumber=4[/img]
The front crossbar does not appear to have the upgraded anchor.
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=120307&g2_serialNumber=4[/img]
The rear traveler seems to run on one "ball",(left side) & one "slug", (hidden on the right). Is that normal?
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=120316&g2_serialNumber=4[/img]
What is the difference between the H18 SE, SX, & Magnum models?
I think the mainsail has "18SE" written on it in pencil, from the manufacturer. I see what looks like "SX" written on the underside of the tramp.
The mast measures 28'1".
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=120310&g2_serialNumber=4[/img]<!-- editby --><em>Edited by Edchris177 on Nov 05, 2015 - 11:17 AM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)