[quote=Edchris177]No. If you use the factory setup, (fixed block attached to padeye just below mast hound), you can readjust tension. Just pull the tail out of the jam cleat at base of mast, tension as desired, then re-cleat.
If you run the both ends of the halyard down the forestay, & cleat near the bridles, you have to get off the boat to adjust it, or hang a small block & run line back to front beam somewhere.
I have roller furling, & never adjust tension while underway.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
