Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra Inter 20 carbon mast

[quote=schoen.steve]My rotation system was doing the same thing - oblonging one of the post holes on one side. I have a plate with two screws about an inch apart on the inside with the two screws through the mast. One that had a nut on it and the other that the rotator was on with a nut. I moved the rotator to the other screw post. Hopefully it will hold till the end of the season at which time I'll have to remove the mast base to get access. My point is that if you want to do rivets, or screws, I would definitely put them into something other than just the mast. A bent piece of metal glued to the inside would help greatly in displacing the load. My two cents![/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.