[quote=Dogboy]Tie the halyard line through the block, not the thimble so everything is lined up when you hoist (i.e., the block is not flopping around separately). You can also just cut the block off of the halyard and just use the thimble. The later halyards were not supplied with a block as the block really isn't necessary.
This is one of the PITA factors on the H18, but usually after a couple tries, the block/thimble will pass through the opening in the top of the luff sleeve. Make sure everything on the halyard is as low profile as possible.
sm[/quote]
No HTML tags allowed (except inside [code][/code] tags)
