Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: 84' Hobie 18 hull repair, no foam core along center of hull??

[quote=Dogboy]If it's delaminated, I would try to inject resin into the glass. It's going to be tricky because you'll have to be very careful as you drill into the hull so you don't punch through to the opposite side. Then use un-thickened resin and try to squirt it into the delaminated area and flex the hull as you do so to try to get the resin to work around inside the separated layers. If that doesn't work, I think you're gonna be grinding. It shouldn't be that bad if you have to grind it out though since it should be pretty obvious when you've gotten to solid glass. sm[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.