[quote=klozhald][quote=rcnesneg]Are the pressure equalization holes on the Prindle right below the plugs below the rear cross-beams? I found a little hole, about 1/16th of an inch in diameter, just below the plug on both hulls on my Prindle 16 a few days ago.[/quote]
The plug covers the cavity for the crossbeam bolts. The little hole below is a weep hole to drain that cavity. There should not be any connection between this cavity and the plenum inside the hull. The bolt goes up through solid fibreglass and through the beam.<!-- editby --><em>Edited by klozhald on Jan 31, 2015 - 12:00 PM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
