Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: EPO Rudders

[quote=CatsailorMike]i've done epo rudders using this. prep as dogboy says and then mix this graphite powder filler with your resin and roll on followed by "tipping" with a foam brush to flatten out. let it cure and wet sand with 600 or finer to get a glass smooth, low friction surface. http://www.westmarine.com/buy/west-system---423-graphite-powder-12-oz--323659[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.