Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: My new riTe.

[quote=catmodding]Pete, No stringers whatsoever, just a thin under-deck, balsa ( grain vertical ) and a epoxied deck with gelcoat. About 2 centimeters thick. In the bottom of the hulls a tempex foam block. Around the rear portholes theres som minor delam. Gonna take care of that next season. Removing front or rear-deck is do-able, depending on your space for working on the cat. The injection-method is something for next season, never have done that. Season is closing overhere, just wanna sail this T before that. [quote=pknapp66]Andre, Great job documenting the repair. Did you have any stringers under the rotten foredeck when you remove it? How thick was the deck that you removed? Like Edchris mentioned, mine has stringers about 16 inches apart and a 1/4 inch plywood deck. My plywood stringers have started to delaminate and I am thinking about drilling into them from the top,injecting epoxy, and then using stainless screws to pull them back together. Any other ideas would be appreciated. Do not want to remove the decks if at all possible. Pete[/quote][/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.