Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Prindle 18 jib halyard setup question.

[quote=pbegle]You have a 2 piece halyard connected with sister clips. Run the halyard thru the ring, then thru the short pigtail of upper forestay & back down thru the ring. Now attach head of jib to shackle above hook, put the halyard inside the zipper & around the lower forestay. With your third hand pull the halyard to raise sail as you close the zipper & feed sail. When sail is near top, careful up & down pull to hook the ring. Tie downhaul line immediately, unhook lower rope halyard via sister clips & close the zipper. I prefer to stow 1/2 halyard ashore as if you put in pocket with righting line & capsize, it may pull out into water. Now spend the next three days pondering this 3 handed system to invent a better way! Pete[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.