[quote=robpatt]wire coat hanger taped to your new bungee... feed it through...lube and twist/rotate if you need...
but drilling isn't as bad as you think... get a new titanium 3/16 bit.. matter of seconds you're done
re-rivet with alu 3/16 rivet.. there's no load on that endcap that requires stainless rivets. 50 alu 3/16 rivet pack is like $5... stainless rivets are almost $1 each.
while you're at it on the boom put metal jam cleats on for outhaul and rotator if you can.... probably will need new internal casting things however... murrays.com plastic wears and your line will slip.<!-- editby --><em>Edited by robpatt on Apr 22, 2014 - 02:29 PM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)